The other day I came across this ottoman at a thrift store. It was $10. Decided to buy and reupholster.
All done! Clean new fabric.
Please excuse my crazy paintings on the wall (the highest one up isn’t mine, bought at a Flea Market in Krakow, Poland-the other two are mine).
You may have remembered when I had a couple vinyl chair that looked like this:
These were rather dirty vinyl chairs from the 1960’s. They were airport terminal chairs that came from France. Together they cost me 70 euros at an antique store in Germany. Also, the board which the cushion was sitting on was particle board that was crumbling apart, as pictured below.
My father cut me a couple new boards for the cushions to rest on. Instead of particle board that was 60 years old and disintegrating, he used ply wood like this:
I changed the vinyl to look like this (my first upholstery attempt). My first attempt at sewing with vinyl too. You may remember when I blogged about it here: Vinyl Chairs My First Try
But I realized that I actually really liked the original white look of the chairs so I went and bought white vinyl and started the process again.
And I did both chairs this time in white vinyl. Slightly different pattern.
And I did the other chair in the same original style but with a seam down the middle to effectively use my vinyl without having to purchase more, if you know what I mean. I button tufted the seat cushion (first attempt at button tufting too!). I can’t wait to do more button tufting!
And here they are together with some semi-cute pillows I sewed.
We made it through the big 7.0 earthquake here in Anchorage, Alaska (Friday November 30th 2018 at 8:29am). Thank you very much! There were no fatalities here, just lots of damage to our city. We have lots to be thankful for right now–especially for people. We thank scientists, engineers and strong building codes. The famous Haiti earthquake of 2010 killed 300,000 people and was also a 7.0.
Where was I during the earthquake? In the kitchen. I had just finished cleaning up after breakfast. As usual, Samson was covered in food and would need the usual 5-7 minute wipe down. I looked at the clock. It was 8:21 am. I removed him from his highchair and he started to wander into the living room. I started to walk to the coffee pot when I started to hear a rumble and a little shaking. “Earthquake” I shouted.
Without hesitation I scooped up both of my children. I dashed right into the hallway/doorway area. All I could do was shield both of them with my body as the house began to shake uncontrollably. The house was having a grand mal and I didn’t know what to do.
The painters, who earlier in the week were at the tip-top of a giant ladder painting our 20+ foot tall walls had now progressed to the shorter walls in the hallways and kitchen. As luck would have it, neither were on a ladder when the big quake started.
All I remember is a lot of real fright and cursing from all of us. I guess it didn’t last that long. But it seemed like an eternity. Both of our painters were life-long Alaskans. “Is this fairly normal to experience this?” I asked during the quake. “No. Never felt anything like this.” they said.
This past week has been one seizure after another…one aftershock after another. Sometimes I feel like I’m on a boat at sea.
On the brighter side, I finally finished the ottoman I have been incrementally working on for 2 months.
In October I came across this old $5.00 Ottoman. I had to snatch it. Of course, a refreshment would be needed.
And here is a close up. The top vinyl covering was starting to break down.
Good news. The underlying structure and foam padding on this Ottoman were in terrific shape. All I needed to do was cut off the old vinyl fabric right along the seams and learn how to sew a snug, new one. Another sewing challenge for me.
YOU WANT TO GET THE BEST POSSIBLE FIT SO THAT IT DOESN’T LOOK TOO FUNKY.
Here is the old vinyl that I cut from the ottoman. Use this as your pattern to sew your new cover. You get the idea.
Here is the finished product.
After two glasses of Port I think I’m a bit uninhibited and so I’m blogging again….You have two options: A. Leave or B. Forgive me
I keep mentioning that I’m going to reupholster old chairs I got at a flea market in Germany.
A couple years ago I bought BOTH of these lovely button tufted accent chairs for $70 at the American Ramstein Airforce base. What a terrific deal! As you can see here, chairs of this nature are not cheap: I was told that they were airport seats from France circa 1960. Waaaait whaattt? French airport seats from 1960?!? I fell in love.
But the vinyl has started to break down in places and become very dingy–even spray paint would not fix it :(. Be careful when spray painting vinyl, it can leave a sticky, (nearly) permanent residue as it binds to the material. The particle board underneath the vinyl was literally starting to crumble apart.
I decided to embark upon another reupholstery venture, at least for one of the chairs. This time, it would be more challenging as I would need to sew the vinyl covers for the chairs. I would also need to cut out new pieces of wood to affix to the foam (thanks Dad!); particle board doesn’t last forever.
Make sure to cut off all the vinyl pieces neatly so that you can re-use them as your pattern. I decided to use a bunch of extra blue vinyl left from my previous chair project that you can see here.
Cut out your new vinyl using your old vinyl as a template. I’m just using vinyl scraps that I had from my previous project (so I didn’t purchase any new materials for this project).
It turns out that sewing coverings for chairs is akin to sewing clothes. Sewing the sides of the chair is almost like sewing sleeves. NOT FUN:
I want to be honest. This was one of the most difficult sewing tasks I’ve yet attempted. YOU KNOW HOW HARD IT IS TO MAKE A PIECE OF MATERIAL FIT SNUGLY TO SOMETHING ELSE? At one point I started to re-do my project. I decided to add in a couple stripes of another color of vinyl (teal) to my chair to give it a bit of flair:
I won’t bore you with the details–this chair was a REAL struggle. Finished results are here:
It’s the chair with the book perched on top of it. It offers some exquisite modern beauty to our living room: I’m so proud of my striped vinyl design–all from scraps!
And what to do with some of the extra scraps of vinyl lying around? Attempt to make a purse, of course!
Yes! I still need to reupholster the other chair. To be continued…
We have a big paint job coming up and I will share the details for that too. All of those salmon colored walls in our living room? We’re turning them white.
Before our big move to Alaska, I was busy reupholstering our dining room chairs. I wanted to finally share the results!
I know what you’re thinking, “Didn’t you already reupholster those chairs a couple years ago?” Yes! I’m still working with the same chairs.
You remember when I bought these (pseudo?!) Chippendale lovelies for only $20 euros a piece at a little flea market in Germany? (That’s right, I got 4 of these CHAIRS FOR ONLY 80 Euros!). If you go to your local Pier 1 Imports, you’ll be spending a minimum of $100-$120 PER CHAIR, so I think I got a good deal.
Remember I decided to reupholster them so I removed the cushions from the chairs and tore off the old fabric.
I reupholstered all 4 chairs with this black and white striped IKEA fabric:
Sensational results, I thought. They looked rather striking with our table here. By the way, I got this solid mango wood table on sale for 250 euros at Mobel Martin (in Kaiserslautern, Germany).
But sadly as physics would have it, all things are subject to entropy.
So, once again, two years later, I removed the fabric and decided on different material. How about vinyl? It’s easy to wipe off spills and is far less penetrable than cloth fabric.
I was able to buy a roll of vinyl (4 1/2 yards I think), for around $40 bucks at Joann’s Fabric. Remember to bring in your 50% off coupon for one item to get that price– otherwise you’ll be spending around $80 for that amount.
I chose blue vinyl, regular $14.99 per yard (but half off with my coupon).
Removing old material is usually pretty easy. Just use a pair of needle nose pliers and a little flat head screwdriver. (I broke 2 in the process). Yank off the old fabric and use it as your template for cutting out your new piece of fabric that will cover the chair. When cutting the new fabric, make sure you cut a bigger piece than your previous piece. You want lots of material to work with in order to get it just right.
Just lay the piece of cut vinyl on top of the seat cushion and tape around the underside of the seat first, positioning it in place (not shown here, sorry). Next, use your staple gun and start pulling the fabric nice and tight as you staple the vinyl to the underside, wooden section of the seat.
Here is the underbelly of the seat and what it looks like when you staple it. As you can, it can be quick and doesn’t have to look perfect. No one will see it.
These are the tools I used for my reupholstery job:
And the kids couldn’t resist playing with them..
Here are the chairs with the new vinyl material. Maybe not as striking as the black and white fabric, but they sure do wipe off quickly!
AND….I still have quite a bit of blue vinyl material left. 🙂 Which means this reupholstery job was much less than $40. Come back soon if you want to see yet another reupholstery job I’m working on with this same fabric; I’ve got a more challenging chair.
A Slice of My Trash, Travels and Tots 